Sleepsense (SLP)

Flex Sensor Interface Cable + UARS Flex Disposable Sensors (10)/ Safety DIN Connectors

The Y Splitter Cable allows you to connect two leg sensors to one input on the system. For use with #1771 Limb Movement Sensor. Key Connector

Y Splitter Cable for use with #1777 PLM Sensor,designed specifically for Alice 6 systems.

Elastic Ankle Band (2/Pack)

For use with SleepSense Limb Movement Sensors

SleepSense Limb Movement Sensors are strategically strapped to the foot to monitor limb movements. They provide a clear, artifact free and qualitative indication of limb movements. Optimal positioning on the tendons ensure exceptional sensitivity.

Kit includes:

1770 â“ Limb Movement Sensor â“ Safety DIN Connectors

1730 â“ Elastic Ankle Band

Limb Movement Sensor Kit (2 Limbs + 2 bands) / Key Connector (200 cm)

Limb Movement Sensor Kit (2 Limbs + 2 bands) / Key Connector Leg Color Label (200 cm)

Limb Movement Sensor Kit (1 Limb + 2 bands) / Key Connector (200 cm)

The SleepSense Limb Movement Sensor is strategically strapped to the foot to monitor limb movements. This sensor produces output even when there are minute movements ofa single toe and, of course any stronger movement. The #1771S Limb Movement Sensor is equipped with a key connector.

1 Year Warranty
Also available as a Kit

Limb Movement sensor Kit (2 Limbs + 2 bands) / Safety Din Connectors (290 cm)

The Alice 5 Compatible Actimeter/PLM Sensor, based on a motion switch, monitors limb movements during sleep. Every time there is a movement, even the smallest one, the sensor produces a signal that is picked up by the system. This sensor is applied to the leg or foot using adhesive tape.

The 1774-Kit includes the following:
1774 Sensor
1343 Infant Velstretch® Band 1"

1 Year Warranty

The SleepSense Actimeter/PLM Movement sensor provides a clear, artifact free, qualitative indication of movements. Designed specifically for use with Alice 6 systems.

1 Year Warranty
Also available as a Kit

The SleepSense Actimeter/PLM Movement sensor provides a clear, artifact free, qualitative indication of movements. Designed specifically for use with Alice 6 systems.

Kit Includes #1343 Stretch Band 

1 Year Warranty

The EZ-Talk Connector fits between the CPAP mask and hose giving CPAP users an easy way to momentarily stop the flow of air to talk, cough or take a sip of water without the inconvenience of removing the mask. Great for new CPAP users or those that are finding it difficult to comply with CPAP.

Adult Soft-Tip SpO2 sensor - Nonin® compatible - 90cm

Adult Soft-Tip SpO2 sensor - Nonin® compatible - 300cm

Child Soft-Tip SpO2 sensor - Nonin® compatible - 300cm

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002-L120 Semi-Reusable Inductive Plethysmography Belt is approximately 120cm in length.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002-L150 Semi-Reusable Inductive Plethysmography Belt is approximately 150cm in length.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002-L40 Semi-Reusable Inductive Plethysmography Belt is approximately 40cm in length and is designed for use with infant sized patients.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002-L60 Semi-Reusable Inductive Plethysmography Belt is approximately 60cm in length and is designed for use on pediatric patients.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002-L90 Semi-Reusable Inductive Plethysmography Belt is approximately 90cm in length and is the smallest adult size.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9002S Semi-Reusable Inductive Plethysmography Belt is approximately 40cm in length and is designed for use on neonate/infant patients.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Latex Free

SleepSense Inductive Belts are designed to work with SleepSense Inductive Interface Cables. When used together, the inductance of the inductive belts is exactly proportional to the cross section of the beltâs closed loop around the body; it therefore changes as the patient breathes. The electronics in the system or interface box measure these inductance changes to generate a signal that is the most accurate and reliable replication of respiration waveforms. Inductive belts easily connect to any PSG system compatible with inductive effort sensors through a dedicated SleepSense Cable.

SleepSense Semi-Reusable Inductive Belts are made of soft, stretchy material and are available in multiple sizes ranging from neonate-Adult XXL. Velcro(R) tabs on these belts attach anywhere on the belt itself, making adjustments very easy and keeping the profile slim and comfortable. These belts have a low cost per use, are easy to clean and are made to last roughly 70 uses before needing replacement.

The 9003-L120 Semi-Reusable Inductive Plethysmography Belt is approximately 120cm in length.

For use with SleepSense Inductive Interface Cables
60 Day Warranty
Available in white 9002-LXXX or blue 9003-LXXX